By a strange set of circumstances, I’ve got myself a roof….finally! Jeff, the guy who’s camping here, needed some car repair. He asked if I knew anyone in the area and I didn’t, but I posted on the local Buy/Sell Facebook group, and got contacted by Tyler’s wife. He came out last Friday to look at the car and see what parts were needed. I don’t even know why I did it, but I asked Tyler if he ever did any carpentry work. He said that was actually his profession; he just worked on cars in his spare time. So he walked over to look at the house and he was instantly impressed because I used double top plates. That’s how you’re supposed to build a proper stud wall, but he says nobody around here does it. Huh!
He came back on Wednesday to fix Jeff’s car. Oh and Jeff is going to stay here all summer and pay me $100 a month.
Tyler gave me a quote of $500 to do the roof, that would be him and his partner working together. YES! Finally a reasonable quote!! So the very next day (today) he’s here to start work! He didn’t bring his usual partner; that guy was working on another job. He brought his neighbor Doug who has done work as a roofer. He’s way too chatty and Tyler has to keep bugging him to get back to the job at hand, and he knows next to nothing about building, though he doesn’t seem to know it. Tyler and I are have to keep correcting him when he says dumb stuff. He’s pretty insistent with his ideas.
Tyler also had never built a roof using common rafters and a ridge board, so I walked him through that process and he caught on quickly. I had built a 2×4 contraption that sits on top of the stud wall, right in the center, and the ridge board just slides right into a slot in the top to hold it in place. I designed it so the height of the ridge board would be perfect for nailing the rafters onto.
At first I know they thought it was really weird and dorky but by the end of the day, they really liked how it worked. The board holders got screwed in place at each end and the ridge board slipped into place. The first time they tried to get the correct placement for the ridge board, it seemed to be a couple inches too short! We couldn’t figure out what the problem was, as it was all level. Finally Tyler measured the ridge board and it was a pre-cut! So it really WAS a couple inches too short! They went back and chose a nice straight 8′ long board and it fit perfectly. They attached the middle 3 sets of rafters first, then those held the ridge board in place after they removed my board holder contraption so then they could install the rafters at each end.
I asked them to measure the top of the stud walls diagonally from each corner, to check that it’s square. I was pretty proud when it came out to be just 1/4″ out of square, same as it was at floor level. That’s well within acceptable tolerances.
The guys took a break and drove up to the general store to get drinks. Doug ONLY drinks Dr. Pepper and he didn’t bring any with him. When they got back, they said they’d been bragging about me at the store, this 60 year old woman who was building her own house, and doing a pretty fine job of it, too! I told them I was 70 and they said “Oh damn, that would have made a MUCH better story”!!
I didn’t have the rafters ready for the little bedroom “bump-out” portion because I needed to figure what angle I wanted on them. In order to do that I needed to have the main house rafters in place. So once the rafters were done, Tyler held up a board and moved it around until the angle looked good, and then he marked it for the birdsmouth cut, the length and the soffit end angle.
I have all cordless Dewalt tools, which are really very good, But I just have the 18 volt batteries, because the 20 volt lithium batteries require a pure sine wave inverter, which I don’t have. They can explode if you charge them on a modified-sine wave inverter. That’s just what I’d need, a THIRD total loss house fire! The drills work great on the 18v but the circular saw really requires a lot more power, I end up using one whole battery to cut one board! And it really really difficult to cut angles with it. So I struggled with that first board while the saw kept bogging down. Finally Tyler said he’d take the Master plus 4 more 2×6’s home with him and cut them with his saw. So that’s where we left things today. Isn’t it cute?! It’s a 10/12 pitch.
We should finish up tomorrow! I spent nearly the whole day on my feet, but was wearing my knee braces so my knees are fine; I’m just totally exhausted and my arms feel like limp noodles from all the carrying 2×6’s and cutting, . I’m gonna be hurting tomorrow, I’ll bet.
I’ll need to decide whether to do another Balance Transfer on my VISA card so I can keep going & do the siding or not. I think I really want to keep progressing, and I’d love to be able to hire Tyler to help me with it. He actually listens to me! I’ve caught him before he made a couple big blunders, and he’s done the same for me too. I think he & I could work together very well.
My former camping buddy Deb has come for a visit!! She’s on her way to her new home in Pahrump, NV but can’t get into it until June 1, I’ve loved having her here! Just like when we camped together, we only see each other for probably a total of 30 minutes a day, because we’re both introverts. A little human contact goes a long ways with us. She has a mini-van with a cot in back that she sleeps on.
Yesterday Deb & I went to the Hon-Dah Casino in Pinetop. We signed up for the Players Club and got $5 in free play plus a $6 discount on food. I ran through my free play in a very short time on the penny slots, and when I got up to leave, I found a lucky penny on the floor! We ate their buffet lunch, which ended up costing only $2 each. Deb bought mine. Thank goodness the desserts didn’t look THAT delish; I was able to resist. Then Deb wanted to play the slots a little more. I ventured a whole dollar and ran through it in no time, just playing once cent at a time! Some lucky penny that turned out to be. No wonder the other person threw it on the floor. Deb placed a $.50 bet and won $52.50! So it turned out to be a pretty good morning’s work for her.
She’s leaving tomorrow. I will really miss her. She’ll still be my geographically closest friend though, only 9 hours’ drive away.
Here’s a couple bonus photos of ME, sneakily taken while I was cutting a board. Note my very fashionable knee braces!
